真空注入法在功能性食品加工中的试验研究

功能性食品是除具有原有的营养功能外,还具有一种或多种能够提高人的健康状况或防治疾病的靶向功能。真空注入法是一种新型的功能性新鲜果蔬的生产方法,可以在多孔产品中注入任何成分,以调整产品组成。在真空注入过程中,温度、溶液浓度和真空处理时间是影响注入量的重要参数,本文研究了这三个参数对真空注入强化萝卜钙含量的影响。     

激光二极管侧面抽运Nd:YAG锁模激光器的研究

利用谐振腔的稳定条件对激光二极管侧面抽运的Nd：YAG锁模直腔的稳区特性和谐振腔内的光斑分布进行了分析。根据对腔参量的分析，选取合适的腔参量设计了一个简单的侧面抽运直腔，该谐振腔腔形简单，没有像散，振荡光模式好，有利于激光器的锁模运转。实验中采用国内自行研制的半导体可饱和吸收镜，实现了激光二极管侧面抽运半导体可饱和吸收镜锁模Nd：YAG激光器的连续锁模运转，平均输出功率为2W，锁模脉冲宽度为10ps，重复频率为100MHz。结合实验结果进一步讨论了半导体可饱和吸收镜的一些参量如饱和恢复时间、调制深度等对实现稳定连续锁模的影响。     

改进型迈克耳孙干涉仪

采用分光梭镜代替迈克耳孙干涉仪中的分束镜和补偿板，不仅消除了杂散光斑，且简化了仪器的结构．     

相对论速调管放大器辐射频率可调性机理

 用场方法研究了相对论速调管放大器辐射频率的可调性。发现调制电流频率的可调性与一阶Bessel函数的周期相关，对应相同的一阶Bessel函数值，可以有多个不同数值的宗量，调制电流的频率与Bessel函数宗量数值包括中间腔与提取腔之间的距离和电子束的传输速度等因素相联系。理论估计的调制电流频率可调范围与实验测得的结果符合得很好。相对论速调管放大器辐射频率的可调性还取决于提取腔的设计。     

Tokamak Experiment and Tokamak Engineering——Development of the Plasma Diagnostics on HL-2A Tokamak

The main mission the HL-2A tokamak is of the experiments on to explore the divertor physics and to investigate the plasma confinement, transport and instabilities with high power auxiliary heating and advanced fuelling, it is necessary to develop more new diagnostics and increase the spatial and temporal resolutions of the measurements for exist system. Up to now, about 30 diagnostic systems have been moved from HL-1M to HL-2A tokamak. Other 10 diagnostic systems are being designed and installed on the device. In developed in last 2 years, will be presented.     

J/ψ Dissociation in QGP via Multi-gluon Absorption

We propose that the suppression of J/ψ production in relativistic heavy ion collisions may be explained by that J/ψ dissociates via absorbing multi-gluons in the environment of quark-gluon-plasma (QGP) where abundance of gluons is expected.     

用地面阵列寻找TeV能区γ点源的方法探讨

文中探讨搜寻TeV能区γ点源的方法.讨论利用student变量t判断来自源区及背景区宇宙线事例的统计差别,并由Bayes定理与MonteCarlo模拟相结合计算源区各能段的信号数,推算蟹状星云在TeV能区的γ射线微分能谱     

热线法测定气体导热系数实验的探讨与改进

在准静态低气压下测量气体的热传导系数时，理论上在低压强范围内应得到Q^-1低-p^-1线性关系图象，但实验数据所绘出的图象出现明显的非线性．本文着重分析出现非线性的原因，并提出实验改进的方法。     

Synthesis of poly(arylene disulfide)-vermiculite nanocomposites via in situ ring-opening reaction of cyclic oligomers

An exfoliated poly(4,4^′-oxybis(benzene)disulfide) (POBDS)/vermiculite (VMT) nanocomposite was prepared by using cyclo(4,4^′-oxybis(benzene)disulfide) (COBDS) oligomers and cetyltrimethyl ammonium bromide exchanged VMT. The POBDS/VMT nanocomposites were fabricated in two steps. First, the COBDS oligomers were used to swell and exfoliate organo VMT to afford COBDS-VMT nanocomposite precursor. Subsequently, the exfoliated POBDS-VMT nanocomposite can be made via in situ and instant melt ring-opening polymerization of the COBDS-VMT nanocomposite precursor. High molecular weight POBDS polymer can be formed in a few minutes. The nano scale dispersion of VMT layers within POBDS polymer was confirmed by both the X-ray diffraction patterns and TEM examinations. This methodology provides a potential approach to synthesize high performance polymer nanocomposite.